REASONS
- Excessive film thickness of the lacquer.
- Using the wrong hardener.
- Humidity is too high.
- Improper drying, poor storage conditions.
- The mixture pot-life has expired.
- Unsuitable primer or lacquer.
PREVENTION
- Apply a thinner layer of lacquer.
- Check the hardener in the mixture.
- Reduce the humidity level.
- Check the drying method and storage conditions.
- Use a fresh lacquer mixture.
- Use a suitable primer or lacquer.
SOLUTION
- Sand the surface down to the base/substrate.
- Re-apply the lacquer according to the recommendations.
For more information, do not hesitate to contact us.